Cuervo, A.; Narváez-Tovar, C.A.; Rodríguez-Baracaldo, R.:
Assessment of microindentation method in the characterization of DP600 response using phases distribution and a specific shape parameter along RVEs and FEM simulation approaches. En: Journal of Applied Research and Technology, ISSN: 1665-6423, Universidad Nacional Autónoma de México, V.20, No. 6, 2022, p. 686-702. DOI https://doi.org/10.22201/icat.24486736e.2022.20.6.1121
Anduquia, J.M.; Vargas, S.; Ortiz, D.V.; Narváez-Tovar, C.A.; Rodríguez-Baracaldo, R.:
Estudio de los mecanismos de fractura de un acero de bajo carbono antediferentes estados de carga biaxial empleando un dispositivo tipo Arcan. En: Ingeniare. Revista chilena de ingeniería, ISSN: 0718-3305, Universidad de Tarapacá, V.30, No. 2, 2022, p. 279-288. DOI 10.4067/S0718-33052022000200279
Anduquia, J.M.; Rodríguez-Baracaldo, R.; Narváez-Tovar, C.A.:
Computational and Numerical Analysis of Ductile Damage Evolution under Load-Unload Tensile Test in Dual Phase Steel. En: Strojni¿ki vestnik - Journal of Mechanical Engineering, ISSN: 0039-2480, University of Ljubljana, V.64, No. 5, 2018, p. 339-348. DOI 10.5545/sv-jme.2017.5137
Garcia Rodríguez, A.; Espejo Mora, E.; Velasco, M.A.; Narváez Tovar, C.A.:
Mechanical properties of polyamide 12 manufactured by means of SLS: Influence of wall thickness and build direction. En: Materials Research Express, ISSN: 2053-1591, V.10, No.10, 2023, 105304. DOI 10.1088/2053-1591/acf6f7
Vallejo-Melgarejo, L.D.; Reifenberger, R.G.; Newell, B.A.; Narváez-Tovar, C.A.; Garcia-Bravo, J.M.:
Characterization of 3D-printed lenses and diffraction gratings made by DLP additive manufacturing. En: Rapid Prototyping Journal, ISSN:1355-2546, V.25, No.-10, 2019, p.1684-1694. DOI: 10.1108/RPJ-03-2019-0074
Narváez-Tovar, C.A.; Garzón-Alvarado, D.A.:
Computational modeling of the mechanical modulation of the growth plate by sustained loading. En: Theoretical Biology and Medical Modelling, ISSN: 1742-4682, V.9, No. 1, 2012, p.1-10. DOI: https://doi.org/10.1186/1742-4682-9-41
Pérez, C.; Avendaño, D., Narváez-Tovar, C.A.; Mujica, L.; Rodríguez-Baracaldo, R.:
Fatigue Crack Growth and Fracture Toughness in a Dual Phase Steel: Effect of Increasing Martensite Volume Fraction. En: INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (IJAME), ISSN: 2229-8649, V.17, No.3, 2020, p.8086¿8095. DOI: https://doi.org/10.15282/ijame.17.3.2020.02.0606
Márquez-Flórez, K.; Silva, O.; Narváez-Tovar, C.A.; Garzón-Alvarado, D.A.:
A comparison of the contact force distributions on the acetabular surface due to orthopedic treatments for developmental hip dysplasia. En: Journal of biomechanical engineering, ISSN: 0148-0731, V.138, No.7, 2016, 074501 (7 páginas). DOI: https://doi.org/10.1115/1.4033547
Velasco. M.A.; Narváez-Tovar, C.A.; Garzón-Alvarado, D.A.:
Design, Materials, and Mechanobiology of Biodegradable Scaffolds for Bone Tissue Engineering. En: BioMed Research International, ISSN: 2314-6133, V.2015, 2015, 21 páginas. DOI: 10.1155/2015/729076.
Garcia Rodriguez, A.; Velasco Peña, M.A.; Narváez-Tovar, C.A.; Espejo Mora, E.:
Experimental analysis of failure behaviour of PA12 specimens manufactured by SLS as a function of wall thickness and build direction. EN: Rapid Prototyping Journal, ISSN: 1355-2546, V. 30, No. 8, 2024, p. 1537-1555. DOI https://doi.org/10.1108/RPJ-01-2024-0038
Garcia Rodríguez, A.; Espejo Mora, E.; Velasco, M.A.; Narváez Tovar, C.A.:
The Influence of Mixed Powder Ageing on the Structural, Chemical, and Crystalline Morphological Properties of the PA12 Used to Manufacture Laser Sintering. En: Polymers, V.17, No.5, 577, 2025. DOI https://doi.org/10.3390/polym17050577.
