Cesar A. Isaza M; Benjamín Zuluaga; J. S. Rudas, H. A; Estupiñán Duran; J. M. Herrera Ramírez; J. M. Meza:
Mechanical and corrosion behavior of PEO coatings on AZ31B Mg alloy reinforced with MWCNTS. Journal of Materials Engineering and Performance. 476, Vol.29. No.2. pp1135-1145 (2020)
Mateo Duarte; Andrés Benítez; Katiuska Gómez; Benjamín Zuluaga D; Juan Meza; Yamile Cardona-Maya; Juan S. Rudas;César Isaza:
Nanomechanical characterization of a metal matrix composite reinforced with carbon nanotubes. AIMS Materials Science. 7-1, 33-45, 2020
S. A Medina; JM Meza; Luiz F Kawashita,:
Damage sequence of honeycomb sandwich panels under bending loading: Experimental and numerical investigation. J Reinf. Plas. Compos. 38: 601¿615, 2019.
K. Martínez ; J. Unfried; R. M Conrado; J. Guilherme; J. M. Meza,:
Experimental study and thermodynamic computational simulation of phase transformations in centrifugal casting bimetallic tube of API 5L X65Q steel and Inconel 625 alloy, Journal of Manufacturing Processes, 32, 318-326, 2018.
C. Isaza; JE Ledezma Sillas; JM Herrera; J. M. Meza.:
Metal matrix composites reinforced with carbon nanotubes by an alternative technique. Journal of Alloys and Compounds. 707, 257-263, 2017.
C. Isaza; JE Ledezma Sillas; JM Herrera; J. M. Meza.:
Mechanical properties and interfacial phenomena in aluminum reinforced with carbon nanotubes manufactured by the sandwich technique. J. Compos. Mater. 51- 11, 1619-1629, 2017 doi: 10.1177/0021998316658784
A. Esguerra-Arce; S. Mischler; S. Moya, C. Amaya; L. Ipaz; L. Yate; J. Meza; Y. Aguilar.:
Atomic aluminum content (x) effect on fretting-corrosion of Ti1-x AlxN coatings for orthopedic applications. Wear. 362-363, 87¿96, 2016. DOI10.1016/j.wear.2016.05.015
Guillermo Idárraga Alarcón; Nico Burgelman; J. M. Meza; Alejandro Toro; Zili Li.:
Power dissipation modeling in wheel/rail contact: effect of friction coefficient and profile quality. Wear. 366-367, 217¿224 , 2016. DOI:10.1016/j.wear.2016.04.026
Sergio Medina; Cesar Isaza; J. M. Meza,:
Mechanical behavior of polyvinyl alcohol reinforced with aligned carbon nanotubes. Revista Materia ISSN 1517-7076: 20-3, 794-802, 2015
Cesar Isaza; Sergio Medina; Germán Sierra Gallego; J. M. Meza,:
A novel technique for production of metal matrix composites reinforced with carbon nanotubes. ASME- Journal of Manufacturing Science and Engineering, ISSN 0094-4289: 138-2,1-6, 2015
Julián D. Osorio; Deiby Maya; Augusto C. Barrios; Adrián Lopera; Freddy Jiménez; J. M. Meza; Juan P. Hernández-Ortiz; Alejandro Toro.:
Correlations between microstructure and mechanical properties of air plasma-sprayed thermal barrier coatings exposed to high temperature. J. Amer. Ceram. Soc., 96-12, (2013), 3901-3907.
J . M. Meza; J. A. Restrepo; J. Cruz.:
Making modular bus body shells from composite materials. JEC Composites Magazine, 59, (2010), 53-54.
F. Abbes; M. Troyon; J. M. Meza and S. Potiron:
Finite element analysis of the penetration depth / tip radius ratio dependence on the correction factor in instrumented indentation of elastic-plastic materials, J. Microm. and Microeng., 20, (2010), 1-8.
J. M. Meza; F. Abbes; M. Troyon:
Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements, J. Mater. Res. 23-3,(2008), 725-731.
J. M. Meza; C. M. Farias; R. M. Souza; J. Cruz.:
Using the ratio: maximum load over unload stiffness, pm/su2, on the evaluation of machine stiffness and area function of blunt indenters on depth-sensing indentation equipment, Mater. Res.,10-4, (2007), 437-447.